Welcome to the New FF1.com. Be sure to check back daily for new product additions.

Respirator Fit Testing

Perform OSHA compliant respirator fit testing per OSHA 1910.134 using QUANTIFIT Fit testing System (Priced per Member).So what is a fit test? A “fit test” tests the seal between the respirator's facepiece and your face. It takes about 7 to complete and is performed at least annually. After passing a fit test with a respirator, you must use the exact same make, model, style, and size respirator on the job.

A fit test should not be confused with a user seal check. A user seal check is a quick check performed by the wearer each time the respirator is put on. It determines if the respirator is properly seated to the face or needs to be readjusted.

Fill out the form below to schedule your Department's annual Fit Testing.

[powr-form-builder id=c155fed6_1483647009]