2 HP Electric 110/220 Single Phase Bantam Power Unit
ET-2.0 Bantam Power Unit (Electric Motor)
- Mineral Base Hydraulic Oil 10,500 PSI (724 BAR)
- Lightweight and easy maneuverability
- Small and compact for convenient storage
- Two-tool connection
- Alternate tool operation
- Supercharged Hydrostatic 2 stage radial piston pump
- Leeson electric motor
- Roll cage included
- Available Couplers: Standard, Flat Face and Coaxial
|
ET-2.0 Bantum Specifications |
|
|
Max. Operating Pressure |
10,500 psi / 724 bar |
|
Length |
24 in. / 609.6 mm |
|
Width |
12.0 in. / 304.8 mm |
|
Height |
13.5 in. / 342.9 mm |
|
Weight |
80 lbs. / 36.3 kg |
|
Motor |
2.0 HP Leeson Electric (Fan Cooled) |
|
Voltage |
110 / 220 Volt |
|
Min. Run Watts |
2,500 |
|
Min. Start Watts |
5,000 |
|
Max. Amp Draw (110 Volt) |
17 Amps |
|
Max. Amp Draw (220 Volt) |
11 Amps |
|
RPM |
3,450 |
|
Hydraulic Pump |
2 Stage Radial Piston Over Piston |
|
Tool Operation |
2 Tool Alternating Operation |
|
NFPA 1936 2015 Ed. |
Yes |
|
Alternating Mode (Per Tool) |
|
|
1st Stage Setting |
3,200 psi / 220 bar |
|
1st Stage Flow |
165 cu in./min - 2,703.9 cc/min |
|
2nd Stage Setting |
10,500 psi / 724 bar |
|
2nd Stage Flow |
50 cu in./min - 819.4 cc/min |