Circul-Air Wall Mount Gear Storage Locker

Turnout gear left in a pile does not dry, and gear that does not dry does not last. Wall-mounted lockers get PPE off the floor and hung with air moving around it, which is the single cheapest thing a station can do to extend the life of a gear set.

The Circul-Air wall mount locker uses four-point steel construction anchored to the wall, so the structure comes from the building rather than from a freestanding frame. That means a smaller footprint than a floor-standing unit and no legs to sweep around.

Locker runs are modular and unlimited - order the widths you need and build along the wall. Each position takes a full set of gear on a fixed solid-aluminum hanger bar, with adjustable shelves above and below for helmet and boots.

Construction:

• Heavy-duty steel, four-point construction
• 1.25 inch 16-gauge square and round tube with quarter-inch wire
• Rugged powder coat finish
• Fixed solid-aluminum hanger bar and nameplate
• Adjustable helmet and boot shelves
• Assembly hardware included - wall mount bracket hardware is not

Sizes:

• 18 inch openings - 2 to 10 positions, 39.5 to 191.5 inches wide
• 20 inch openings - 2 to 10 positions, 43.5 to 211.5 inches wide
• 24 inch openings - 2 to 10 positions, 51.5 to 251.5 inches wide
• All 21 inches deep and 78.25 inches high, based on standard 6 inch floor clearance

Colors: Red or gray as standard. Custom colors available.

A security option is available to enclose and lock each position - see the wall mount locker with security. Add-on hangers for gloves, boots and SCBA are in the accessories section.

Ten-year warranty. Made in North America. Ships knocked down; freight is quoted separately.